Skip to main navigation menu Skip to main content Skip to site footer
ACI Avances en Ciencias e Ingenierías

SECTION A: EXACT SCIENCES

Vol. 3 No. 2 (2011): Número especial por el Año Internacional de la Química

Implementing a Quadrature NMR Spectrometer based on a passive RC splitter-combiner network

DOI
https://doi.org/10.18272/aci.v3i2.65
Submitted
July 29, 2015

Abstract

The present article will explain in some details the requirements of modulators and demodulators using quadrature splitters and combiners, and discuss the target specifications for these devices. The architecture of a passive RC network, useable as a quadrature splitter/combiner is then introduced, the design choices are described, the results of simulations and tests are given. Then, we present a full characterization of some of our modulators and demodulators along with a tuning strategy which achieves an outstandingly accurate quadrature signal processing, and characterizes the error terms of the device at the same time.

viewed = 539 times

References

  1. Kung, S. Y., and Kailath, T. 1985. VLSI andModern Signal Processing. Prentice Hall.
  2. Stringfellow, T. 2001. Sensitivity in NMR. NMR Facility Document.
  3. Halamek J., Kasal M. 1994. Signal Processing in Transceivers for NMR/MRI. Review of Scientific Instruments. 65. 1897-1902.
  4. Halamek J., Kasal M. 1996. High-Resolution Digital Quadrature Detection. Review of Scientific Instruments. 67. 2123-2129.
  5. New Releases Data Book. 1999. Maxim.
  6. Communications Components Designer"™s Guide. 1998.
  7. The ARRL Handbook, American Radio Relay League, Sixty-Nine Edition. 1992.
  8. Design-in Reference Manual, Analog Devices. 2000.
  9. Halamek J., Kasal M. 1997. Bandpass Signal Processing. Radioengineering. 6. 1-8.
  10. Halamek J., Jurak P. 1997. Analog to Digital Converters and Dynamic Range. Journal of Electrical Engineering. 48. 183-189.
  11. RF/IF Designer"™s Handbook, Mini Circuits. 1999.