Abstract
Natural fibers are becoming a key point for the development of new concrete mixes because these fibers are recovered from residual biomass. In this paper, we focus on the natural fib‘ers found in the Metropolitan District of Quito, Ecuador. For this purpose, we searched for materials (fibers) available in the Chemical Engineering laboratory at Universidad San Francisco de Quito USFQ. In this paper, we analyze different literature on how the use of fibers influences the mechanical properties of concrete. Based on this analysis and the materials at the laboratory, we have developed recommendations on which natural fibers are of interest for further experimental research. Furthermore, this paper provides an understanding of how natural fibers influence the mechanical properties of concrete. It also proposes a process for the selection and study of any type of natural fiber for further replicability in mix analysis.
References
He, Z., Zhu, X., Wang, J., Mu, M. & Wang, Y. (2019). Comparison of CO2 emissions from OPC and Recycled Cement Production. Construction and Building Materials, 211, 965–973. doi: https://doi.org/10.1016/j.conbuildmat.2019.03.289
Lantsoght, E. O. L. (2019). How do steel fibers improve the shear capacity of reinforced concrete beams without stirrups? Composites Part B: Engineering, 175. doi: https://doi.org/10.1016/j.compositesb.2019.107079
Bilodeau, A., Kodur, V. K. R. & Hoff, G. C. (2004). Optimization of the type and amount of polypropylene fibres for preventing the spalling of lightweight concrete subjected to hydrocarbon fire. Cement and Concrete Composites, 26(2), 163-174. doi: https://doi.org/10.1016/S0958-9465(03)00085-4
Guerrero, V., Dávila, J., Galeas, S., Pontón, P., Rosas, N., Sotomayor, V. & Valdivieso, C. (2011). Nuevos Materiales: Aplicaciones Estructurales e Industriales. Escuela Politécnica Nacional.
Hakeem, I. Y., Agwa, I. S., Tayeh, B. A. & Abd-Elrahman, M. H. (2022). Effect of using a combination of rice husk and olive waste ashes on high-strength concrete properties. Case Studies in Construction Materials, 17. doi: https://doi.org/10.1016/j.cscm.2022.e01486
Wahyuni, A. S., Supriani, F., Elhusna & Gunawan, A. (2014). The performance of concrete with rice husk ash, sea shell ash and bamboo fibre addition. Procedia Engineering, 95, 473–478. doi: https://doi.org/10.1016/j.proeng.2014.12.207
Noor Abbas, A.-G., Nora Aznieta Abdul Aziz, F., Abdan, K., Azline Mohd Nasir, N. & Fahim Huseien, G. (2023). Experimental evaluation and statistical modeling of kenaf fiber-reinforced geopolymer concrete. Construction and Building Materials, 367. doi: https://doi.org/10.1016/j.conbuildmat.2022.130228
Gulzar, M. A., Ali, B., Barakat, O., Azab, M., Najemalden, A. M., Salih Mohammed, A. & Alashker, Y. (2023). Influence of jute fiber on tensile, electrical, and permeability characteristics of slag concrete: A better, cheaper, and eco-friendly substitute for conventional concrete. Journal of Natural Fibers, 20(1). doi: https://doi.org/10.1080/15440478.2023.2170947
Rama Rao, P. & Ramakrishna, G. (2021). Experimental investigation on mechanical properties of oil palm empty fruit bunch fiber reinforced cement mortar. Materials Today: Proceedings, 46, 471–477. doi: https://doi.org/10.1016/j.matpr.2020.10.269
Caizaguano, Ó. & Terán, G. (2020). Caracterización del hormigón con fibras naturales del raquis de la palma africana de aceite y la estopa del coco [Thesis]. Escuela Politécnica Nacional. https://bibdigital.epn.edu.ec/handle/15000/21247
Orejuela-Escobar, L. M., Landázuri, A. C. & Goodell, B. (2021). Second generation biorefining in Ecuador: Circular Bioeconomy, Zero Waste Technology, Environment and Sustainable Development: The Nexus. Journal of Bioresources and Bioproducts, 6(2), 83–107. doi: https://doi.org/10.1016/j.jobab.2021.01.004

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright (c) 2024 Nicolás Hidalgo Robayo, Eva O. L. Lantsoght, Josué Batallas Tituaña, Mateo Montenegro Défaz, Francisco Játiva, Lourdes Orejuela-Escobar
